- Description
- Additional information
Description
Rae Crowther Agility Stencil in Patterns
- Use these stencils for creating patterns on your floor. 3 Patterns available, Ladder, Dot, Star, Cross.
- Precisely cut from high density plastic. Stencils can be reused hundreds of times.
- Lay the stencil on the floor and paint inside the template with any kind of paint or spray paint. Use a high solids paint for durability or quick spray paint.
- Use for setting up permanent patterns indoors or for setting up quick patterns outside.
- Ladder measures 59″ Length x 24″ Width x 1/8″ thick. Dot, Star, Cross measure 28″ x 28” x 1/8″ thick.
- Models: SST-LAD (LADDER), SST-DOT, SST-STAR, SST-CROSS.
Instructions:
1. 
Clean the surface thoroughly before placing the stencil on the ground. The cleaner the surface the better the adhesion of the paint. You can use the stencil on any surface you deem fit for use, but a flat surface is required to make the paint look sharp. Most times the stencils are used on concrete.
2. 
Use a high-quality spray paint (make sure ventilation is appropriate), or if you want a more permanent finish use a PPG high solids paint (this paint has an odor and needs good ventilation when drying). Our example uses black spray paint but you can use any color you deem appropriate, but lighter colors tend to fade faster. We recommend not painting in high winds or when the temp is below 30 degrees.
3. 
Paint all open areas of the stencil. Keep an even spray on all areas. You want a good heavy layer but you also don’t want runs. It does not matter if the stencil gets painted, it won’t hurt the stencil, the stencil is reusable.
4. 
After the paint has dried lift the stencil off the ground.
5. 
The painted stencil should look clean with sharp edges.
6. 
To continue the length of the Ladder simply lay the stencil on the dry paint, aligning the last line of the stencil with the painted line on the ground.
Additional information
| STENCIL SHAPE | Star, Cross, Dots, Ladder |
|---|
